You are currently here:
Stainless Steel Round & Oval Tips
for when you're serious about
![]()


Mandrel Bends are all made from gr 304 stainless steel, all our bends have approximately 1;1/2 x the diameter of straight each side of the bend (we know how hard it is at times to make a system when the bend doesn't have any straight on it). They are all 1.5mm thick in wall section. Mild steel bends are also available at your request.
*: Prices in AUD are GST inclusive.

Copyright © 2oo8 all rights
reserved
Note: This website is
best seen at screen resolution 1280 by 1024 pixels
Mild Steel Stock Bends 1.6 Thick
|
NOTE/- our standard length is 3 metres long |
|||
| (6 Metre lengths available by request (pick up only) | |||
| Prices do not include GST | |||
|
TOTAL PER 3M LENGTH |
|||
|
PRICE (AUD) |
|||
| 22.2 ( ⅞") | O/D | $ 3.98 per metre = | $ 13.20 |
| 25.4 (1") | O/D | $ 4.20 per metre = | $ 13.90 |
| 28.4 (1, ⅛") | O/D | $ 5.70 per metre = | $ 18.80 |
| 31.8 (1, ⅛") | O/D | $ 7.28 per metre = | $ 24.00 |
| 34.9 (1, ⅜") | O/D | $ 7.50 per metre = | $ 24.75 |
| 38.1 (1, ½") | O/D | $ 7.73 per metre = | $ 25.50 |
| 41.3 (1, ⅝") | O/D | $ 8.48 per metre = | $ 27.97 |
| 44.5 (1, ¾") | O/D | $ 9.23 per metre = | $ 30.44 |
| 47.6 (1, ⅞") | O/D | $ 9.68 per metre = | $ 31.95 |
| 50.8 (2") | O/D | $ 9.90 per metre = | $ 32.67 |
| 54 (2, ¼") | O/D | $ 13.50 per metre = | $ 44.55 |
| 57.2 (2, ¼") | O/D | $ 13.95 per metre = | $ 46.05 |
| 63.5 (2, ½") | O/D | $ 15.53 per metre = | $ 51.21 |
| 70 (2, ¾" ) | O/D | $ 17.10 per metre = | $ 56.45 |
| 76.2 (3") | O/D | $ 18.60 per metre = | $ 61.40 |
| 88.9 (3, ½") | O/D | $ 22.13 per metre = | $ 73.01 |
| 101.6 (4") | O/D | $ 30.83 per metre = | $ 101.80 |
| 127 (5") | O/D | $ P.O.A. lengths avail may vary | |
| 152.4 (6") | O/D | $ P.O.A. lengths avail may vary | |
| CUTTING SERVICE AVAILABLE IF REQUIRED | |||
| Prices subject to change without notice | |||
| STAINLESS STEEL gr304 also available P.O.A. | |||
| Above details subject to change without notice. | |||
| Bulk Orders P.O.A. | |||
|
Click here to download this Mild Stock Bends Price
List
|
ANGLE | RADIUS | 1-20 PRICE (AUD) | 21-50 PRICE (AUD) | 51-100 PRICE (AUD) |
| 25.4mm (1") DIA | 45deg | 50.8mm | $ 9.60 | $ 8.00 | $ 6.70 |
| 90deg | 50.8mm | $ 9.75 | $ 7.75 | $ 7.00 | |
| 180deg | 50.8mm | $ 15.34 | $ 12.20 | $ 9.80 | |
| 28.74mm (1, ¼") DIA | 45deg | 69mm | $ 10.00 | $ 8.00 | $ 7.00 |
| 90deg | 69mm | $ 10.25 | $ 8.20 | $ 7.20 | |
| 180deg | 69mm | $ 16.00 | $ 12.70 | $ 10.75 | |
| 31.8mm (1, ¼") DIA | 45deg | 76.3mm | $ 10.25 | $ 8.20 | $ 7.20 |
| 90deg | 76.3mm | $ 10.75 | $ 8.70 | $ 7.55 | |
| 180deg | 76.3mm | $ 16.50 | $ 13.20 | $ 11.60 | |
| 34.9mm (1, ½") DIA | 45deg | 50.8mm | $ 10.40 | $ 8.25 | $ 7.30 |
| 90deg | 50.8mm | $ 10.80 | $ 7.90 | $ 7.60 | |
| 180deg | 50.8mm | $ 16.45 | $ 13.40 | $ 10.70 | |
| 38.1mm (1, ½") DIA | 45deg |